|
LINCOLN> TOWN
CAR |
LINCOLN TOWN CAR INTAKE MANIFOLD
Town Car intake manifold upper plenum repair kit
|
|
 |
1380005
2001-2009 Lincoln Town Car 4.6 Liter Intake
Manifold
199.95
- 4.6 Liter 280ci V-8 Engine
- Reinforced Plastic Molded Intake Manifold (plenum)
- Reinforced Cast Aluminum Coolant Crossover
- Intake Manifold Includes Integrated Silicone Gaskets
- Direct Replacement, No Modifications
Necessary
- Includes Torque Specifications & Bolt Tightening Sequence
- Includes Thermostat, Brackets And Gaskets
- Fits 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Town Car 4.6 Liter
- Replacement Lincoln Town Car Intake Manifold Built To OEM
Specifications
- Does Not Work With Coolant Heated PCV Vehicles
|
|
 |
1380004
1996-2000 Lincoln Town Car 4.6 Liter Intake
Manifold
259.95
- 4.6 Liter 280ci V-8 Engine
- Reinforced Plastic Molded Intake Manifold (plenum)
- Reinforced Cast Aluminum Coolant Crossover
- Includes Integrated Silicone Gaskets
- Direct Replacement, No Modifications
Necessary
- Includes Torque Specifications & Bolt Tightening Sequence
- Includes Thermostat, Brackets And Gaskets
- Fits 1996, 97, 98, 99, 2000 Lincoln Town Car 4.6 Liter
- Dorman Replacement Town Car Intake Manifold Built To OEM
Specifications
|
|
|
New replacement Lincoln Town Car upper intake manifold kits are in stock
and ready to ship. The original intake manifold is prone to cracking,
causing leakage and overheating. The new Lincoln Town Car 4.6 Liter
intake manifold is made of injected molded plastic with an aluminum
crossover and has been reinforced in other failure prone areas to
eliminate these problems. The intake manifold is direct bolt on
application and includes integrated silicone gaskets, torque sequence
and specifications for easy installation.
|
|
|
A/C BYPASS PULLEY
COOLING FAN
EXHAUST MANIFOLD
GAS TANK |
INSTALL SHEET |
|
